IBM System Storage Ideas Portal


This portal is to open public enhancement requests against IBM System Storage products. To view all of your ideas submitted to IBM, create and manage groups of Ideas, or create an idea explicitly set to be either visible by all (public) or visible only to you and IBM (private), use the IBM Unified Ideas Portal (https://ideas.ibm.com).


Shape the future of IBM!

We invite you to shape the future of IBM, including product roadmaps, by submitting ideas that matter to you the most. Here's how it works:

Search existing ideas

Start by searching and reviewing ideas and requests to enhance a product or service. Take a look at ideas others have posted, and add a comment, vote, or subscribe to updates on them if they matter to you. If you can't find what you are looking for,

Post your ideas

  1. Post an idea.

  2. Get feedback from the IBM team and other customers to refine your idea.

  3. Follow the idea through the IBM Ideas process.


Specific links you will want to bookmark for future use

Welcome to the IBM Ideas Portal (https://www.ibm.com/ideas) - Use this site to find out additional information and details about the IBM Ideas process and statuses.

IBM Unified Ideas Portal (https://ideas.ibm.com) - Use this site to view all of your ideas, create new ideas for any IBM product, or search for ideas across all of IBM.

ideasibm@us.ibm.com - Use this email to suggest enhancements to the Ideas process or request help from IBM for submitting your Ideas.

ADD A NEW IDEA

IBM DS8000

Showing 209 of 5792

Ability to require dual control for destructive functions

Our auditors and risk team have identified the risk that support personnel can destroy significant portions of our business with the ability to reconfigure our storage devices. As it currently exists a single employee could perform this destructiv...
over 4 years ago in IBM DS8000 0 Planned for future release

DS8K Should Be Intelligent Enough to Compare Source and Target Data for Remote Copies

When a relationship between a source and target system is accidentally lost, the DS8K must re-copy all the data. Instead the DS8K should be able to compare the source and target data so that only changed data or missing structures are copied. This...
over 3 years ago in IBM DS8000 1 Not under consideration

The result of DSCLI command showckdvol is too slow. Related to TS010511348.

To find out which SafeGuarded Copy page is used, we need to issue showckdvol commands on each volume. We have many volumes and each order takes a long time (sometimes more than a minute). How to have a better response time on this order? This idea...
over 2 years ago in IBM DS8000 1 Not under consideration

Agregate messages on DS8000's HMC. Related to TS010580871.

On the HMC of DS8000, some messages appear several hundred times (1 message per volume). Would it be possible to combine these messages into a generic message? And to allow them to be seen by unfolding the generic message (example by clicking on +...
over 2 years ago in IBM DS8000 1 Not under consideration

Allow for the update of CSM versions without using DSCLI interface.

Many clients use the DSCLI version built into the HMC GUI. Currently if you would like to upgrade the version of CSM you are required to install the DS8KDSCLI on a third server to facilitate the upgrade. This defeats part of the reason of using th...
almost 2 years ago in IBM DS8000 0 Planned for future release

Improvement of the DS8000 decommission process

The embedded DSCLI should support the key management commands.
over 2 years ago in IBM DS8000 0 Future consideration

PCIE hardware - Allowing RCL to continue, rather than halt to perform repair (fail drive/replacement) before continuing.

This would benefit tremendously as a failure then requires coordination and scheduling to complete, which usually puts us outside our scheduled maintenance window with the potential of not getting another window at that time.
almost 3 years ago in IBM DS8000 1 Not under consideration

DS8000 equipps IP port for PPRC link use

DS8000 PPRC links are configured via FC ports. When the distance is over 100km, FCIP converters are used for WAN connection. My customer who manages system z server and storage environments hope to use IP ports for PPRC links because he wants to d...
over 5 years ago in IBM DS8000 0 Not under consideration

Add the source/target DS8K serial or WWN in the DSCLI lspprc command output

When issuing the lspprc command, the output shows you the type of pprc and the source/target lss, but not to which DS8K you are copying to/from. In a multitarget environnement with a lss being the source of multiple pprc, knowing the targeted DS8K...
almost 2 years ago in IBM DS8000 1 Not under consideration

dscli communication with DASD frame - password less

Currently for a dscli software to connect to a DASD frame, a static user ID & password has to be passed. But to automate procedures using a static password defined in the script is an audit exposure. Also I see we can setup a pwfile making pas...
almost 5 years ago in IBM DS8000 0 Future consideration

By clicking the "Post Comment" or "Submit Idea" button, you are agreeing to the IBM Ideas Portal Terms of Use.
Do not place IBM confidential, company confidential, or personal information into any field.